Commercial entrance door installation with visible hardware capability reference

Commercial entrance door hardware

CommercialEntrance DoorHardware

Capital Glass furnishes panic and exit devices, closers, pivots, pulls, and compatible locking hardware for aluminum-and-glass commercial entrances. Selections are coordinated with door construction, traffic, accessibility, and the documents on the job.

Explore components

Traffic & egress

Exit devices align with traffic, egress paths, and jurisdiction requirements for the opening.

Door construction

Stile width, glass area, and hinge or pivot type determine which devices and closers fit.

Access control

Electrified hardware and pulls coordinated without compromising listed assemblies when applicable.

Package alignment

Submittals align with door, frame, and storefront packages before installation.

01

Traffic & egress

Exit devices align with traffic, egress paths, and jurisdiction requirements for the opening.

02

Door construction

Stile width, glass area, and hinge or pivot type determine which devices and closers fit.

03

Access control

Electrified hardware and pulls coordinated without compromising listed assemblies when applicable.

04

Package alignment

Submittals align with door, frame, and storefront packages before installation.

System overview

Hardware matched to door construction

Capital Glass provides commercial entrance hardware solutions for aluminum-and-glass door systems, including panic and exit devices, door closers, pivots, pulls, and compatible locking hardware.

Depending on project specifications, hardware selections may include Von Duprin 98/99 Series exit devices and LCN door closers. Components are coordinated with door construction, traffic conditions, accessibility requirements, and applicable codes.

Product examples to verify: Von Duprin 98/99 Series exit devices; LCN 4040XP door closer.

01
Traffic and egress Exit devices and holding openings are selected for anticipated traffic, egress paths, and authority having jurisdiction requirements.
02
Door construction Stile width, glass area, and hinge or pivot type determine which devices and closers fit the door.
03
Access control Electric latch retraction, electrified hardware, and pulls are coordinated without compromising listed or rated assemblies when applicable.

Component overview

Entrance hardware components

Hardware is reviewed as a set on the door and frame. Select a component to see typical coordination points for commercial general contractors.

Illustrative close-up of commercial door hardware components

Exit device

Panic or fire exit hardware sized to door width and stile, with strikes and power transfer coordinated as required.

Illustrative schematic — not an installation detail or approved hardware schedule.

Coordinated with the package

Reviewed as part of the opening.

  • Panic and exit devices
  • Overhead closers and floor pivots
  • Pulls, locks, and access hardware
  • Submittals aligned with door and frame packages

No specific code compliance, fire rating, or manufacturer certification is implied by imagery on this page. Hardware sets are verified against door construction and project documents. This page is not a named project.

Discuss entrance hardware

Provide the door schedule, traffic conditions, and any access-control requirements. Capital Glass will align hardware with the entrance package.

Request a bid